[ad_1]
Getting that candy orbiting shot round your topic generally is a large ache. There are, after all, reputable options to this downside, however they will price so much.
There may be typically one good answer to the fee downside: DIY. Constructing your personal rigging shouldn’t be all the time as arduous because it appears and sometimes you may get it arrange in a greater or extra customized configuration based mostly in your particular wants.
With that in thoughts, at present we’re going to take a look at an awesome-looking orbit digicam rig from Bestboy Adam. From the preliminary samples it positively does the job of making a candy orbiting shot and it appears very nicely constructed as nicely.
Off-the-shelf choices are nice if you happen to can afford them and so they suit your wants. One thing you could run into is that they don’t have the load capability you want for all of your lenses or they lack the controls or changes you need for a selected shot. We are able to repair this by constructing your personal.
Let’s speak about what you’ll want to get began:
That is going for use to create a heavy-duty model that may maintain as much as 150 kg (or round 330 lb). For those who don’t want something that critical you possibly can swap out the elements for smaller, lighter, and cheaper items.
For instance, changing the 50mm pipe with 35mm pipe will do exactly wonderful for easy product work and nonetheless most likely be over constructed. You can too swap out wooden for the plates if you happen to solely want one thing primary.
Picture Credit score: Kipps
Now that you’ve got your stuff you may get constructing. You’ll need to construct a base with the aluminum plates. You’ll want to search out the middle of the plates after which mark the place the Kipp connector needs to be secured.
He drilled holes for the connector in addition to holes close to the sting for mounting a desk to it or utilizing additional clamps.
Mount the connectors to every plate. Subsequent, he makes use of a metal 50mm shaft which he slides into one of many connectors. Now, take your flange bearings and slide them over the shaft.
Then, you possibly can take your clamps and connect them to the flanges. Your different pipes can now be fitted to the rig and the highest plate might be mounted.
Picture Credit score: PGN Bearings
Take note, which you can all the time swap out or alter the pipes to make it work for various shot sorts.
This needs to be wanting nice already and it is best to have a properly rotating rig with a static middle plate/desk space. Utilizing some low cost double clamps he is ready to mount one other pipe perpendicular to the 2 principal pipes.
Then, a primary clamp with a camera-rig-compatible threading/screw might be hooked up to your rig and also you simply clamp the digicam to this pipe. Utilizing a clamp and pipe makes it simple to regulate the angle.
You’ll need to counterweight the rig. In case your setup is comparatively mild you may have the ability to get away with simply tossing a sandbag on the opposite facet.
For a extra critical setup, you’ll need to get some weights and clamps and safe it to the other facet of the digicam.
Picture Credit score: Kipps
Determining how a lot counterweight is a straightforward course of. If the pipe is centered then you definately simply want the identical weight on either side. If one facet is longer than one other you’ll must do some math.
Multiply the size of the pipe on the longer facet (assuming that is the digicam facet). Take that end result and divide it by the size of the pipe on the quick facet and it is best to now have your counterweight weight.
It ought to work now! Although you possibly can all the time tinker with it.
One factor you could need to do is shoot with the digicam at eye stage. To do that you’ll want a pair additional pipes and the Kipp cross connectors.
Add these connectors to the top of your pipes and have the brand new pipes sticking straight up. Now you possibly can mount the digicam in the identical weight at a a lot higher peak.
One other modification is making use of the pre-drilled holes to connect a bigger base for working with bigger topics. Utilizing a bigger wooden platform or different floor with drilled holes ought to make this simple.
With some care if you’ll be able to get the pipes mounted on a ceiling you can even connect this orbiting rig the wrong way up for some cool configurations. Some heavy-duty tripods may even have the ability to do it.
Sooner or later, you might be able to add a controllable motor for extra exact actions.
This factor is strong and he reveals off pictures with an individual standing on the middle plate. It holds a Blackmagic Pocket digicam with DJI RS 3 with ease.
He additionally hooks up the DJI Ronin-4D as nicely. Even greater rigs needs to be wonderful and he thinks a digicam rig as much as 75 kg (165 lb) shall be simply wonderful with correct counterweighting.
Complete price runs beneath $100.
What do you concentrate on this DIY rig? Assume you’ll strive it your self?
[source: Bestboy Adam]
Order Hyperlinks:
[ad_2]