[ad_1]
Are you eager to get began along with your first screwdriving robotic? The large query in your thoughts might be… how do I set the robotic up?
Will you might have sufficient experience or expertise to put in your personal screwdriving robotic?
What do you might want to know to make sure the robotic deployment is successful?
Fortunately, the method for deploying a screwdriving robotic is very simple. In simply a few hours (or faster in the event you’re super-efficient) you may have a working robotic that performs a screwdriving job utterly autonomously.
Establishing the robotic can also be very simple. However you might want to know what you are doing.
Right here is the whole lot you might want to know to arrange your first robotic screwdriver.
What you might want to know to make use of a robotic screwdriver
In case you have by no means used a collaborative robotic earlier than, you may think that the robotic deployment might be a posh, time-consuming job. That is an comprehensible notion of robotics — typical robotic deployments took weeks or months to setup.
Cobots are very simple to arrange. However it’s true that some duties are simpler than others to deploy.
One in every of our hottest first tasks for cobot automation proper now’s palletizing. This seems to be like a easy job (and it’s) so folks can simply think about what it is likely to be wish to program the robotic — the robotic simply picks up the field, then places it down on the pallet.
Against this, screwdriving seems to be like it could be a tough job to automate. It appears fiddly, prefer it is likely to be liable to errors.
Technical customers with extra robotics expertise are completely happy to get caught in with programming their screwdriving robotic.
However screwdriving could be simply as simple to deploy as some other cobot utility… so long as you might have the proper screwdriving resolution.
Are you prepared for robotic screwdriving? 5 key inquiries to ask
Earlier than you can begin organising your screwdriving robotic, you might want to decide in the event you’re prepared for automated screwdriving.
By clarifying your objectives upfront, you may guarantee that you’re making use of the robotic to the proper screwdriving job.
Listed below are 5 inquiries to get you fascinated by robotic screwdriving in the proper means. You may as well obtain a duplicate of those as a part of our helpful screwdriving guidelines.
1. What are your present key challenges along with your screwdriving operations?
First, determine what challenges you might have been experiencing these days along with your guide screwdriving that you simply suppose a robotic might provide help to clear up.
For instance, are you having difficulties discovering employees for the job?
Are there frequent employee accidents or aggressive lead instances you might want to sustain with?
Readability in your challenges lets you obtain readability along with your resolution.
2. What are your screwdriving wants?
Then, have a look at the technical specifics of your job.
What varieties of screws will you employ? Are they ferromagnetic or not?
What efficiency necessities do you might have? This may embrace necessities like cycle time, batch measurement, and every day manufacturing hours.
3. Who might be in command of the automation venture?
One key issue for all essentially the most profitable automation tasks we have seen is that they’ve a single particular person managing the venture. This particular person would not must do the whole lot alone, however they are going to hold the venture transferring.
Does this particular person have sufficient time to place into the automation venture?
Have they got robotics experience? They need not have any earlier expertise, however a little bit of technical know-how can go a great distance.
4. How will the venture be helpful for what you are promoting?
You need to now have a look at your numbers. You wish to make sure that your screwdriving robotic can convey you a return on funding in an affordable timeframe.
Calculate the yearly value of your current guide robotic screwdriving and evaluate this to the prices of the robotic screwdriving. You should utilize our free ROI calculator that will help you with this calculation.
5. Does your utility cross “the check?”
Lastly, is your screwdriving utility appropriate for robotic automation?
You could find this out by getting into particulars of your job in our Screwdriving Match Instrument. This questionnaire will have a look at the specifics of your job and assess its suitability for cobot automation.
10 easy steps to put in your first screwdriving robotic
Now it is time to set up and arrange your first screwdriving robotic.
With the Robotiq Screwdriving Answer, you may full the set up in simply 10 simple steps. These contain putting in the robotic itself, with the screwdriving device, after which the automated Screw Feeder.
5 steps to put in the robotic screwdriver
First, set up the screwdriving robotic.
This entails the next 5 steps:
Mount the coupling for the screwdriving device onto the robotic arm.
Mount the screwdriving device onto the coupling.
Wire the pneumatics. That is used to choose up the screws if the screw is non-ferromagnetic.
Choose the screwdriving bit that corresponds to your utility.
Connect the vacuum sleeve to the coupler.
That is it! The robotic is now prepared for programming.
5 additional steps to put in the automated screw feeder
Earlier than you may run your screwdriving job utterly mechanically, you additionally want to put in the Screw Feeder. This can provide screws to the robotic in the course of the operation.
These are the 5 steps for organising the Screw Feeder:
Place the Screw Feeder on a flat work floor.
Safe its place with the mounting brackets.
Align the Screw Feeder on its footwear.
Make sure the machine is stage.
Modify the next 4 elements: screw singulator, rail, brush, and screw head clearance.
Now the Screw Feeder can also be prepared!
The straightforward solution to be taught to program your robotic screwdriver
Your robotic screwdriver is now arrange. However how do you program it to carry out your screwdriving job?
The best solution to find out about that is in our free eLearning course.
Within the course, purposes knowledgeable Mathieu Bélanger-Barrette takes you thru the complete means of organising and programming the Robotiq Screwdriving Answer. He additionally reveals the best way to program the robotic in simply 8 minutes!
What questions do you might have about robotic screwdriving? Inform us within the feedback beneath or be a part of the dialogue on LinkedIn, Twitter, Fb, or the DoF skilled robotics group.
[ad_2]